Day: Может 30, 2022

Обзор практичного насоса с принудительной циркуляцией

Насос принудительной циркуляции, который содержит корпус насоса, a motor, an impeller, a pump shaft and a bearing box, wherein the pump shaft is fixed on the bearing box through a bearing; the motor is fixed at one end of the pump shaft; the impeller is fixed at the other end of the pump

Обзор практичного насоса с принудительной циркуляцией Читать далее »

Особенности фторсодержащего магнитного насоса производства нашей компании

The fluorine-lined magnetic pump is a new type of pump that uses modern magnetic principles to realize non-contact torque transmission through the magnetic drive of permanent magnets. That is, when the motor drives the outer rotor (ie, the outer magnetic steel) assembly to rotate, the magnetic field lines act through the magnetic field. The inner

Особенности фторсодержащего магнитного насоса производства нашей компании Читать далее »

Каковы условия работы магнитного насоса

Статическое уплотнение заменяет динамическое уплотнение., so that the flow passage parts of the pump are completely sealed, which completely solves the unavoidable defects of running, falling, dripping and leaking of other pump mechanical seals. The materials of pump body and flow passage parts are made of corrosion resistant stainless steel, corundum ceramics, tetrafluorographite

Каковы условия работы магнитного насоса Читать далее »

Описание продукта шестеренного насоса

The series gear oil pump is mainly used for conveying lubricating oil in lubricating systems in various mechanical equipmentit is suitable for conveying lubricating oil with viscosity below 10 е (75с. st) and temperature below 80℃. It is also suitable for conveying corrosive, non-lubricating and solid particle-containing media. if high temperature is required, contact the

Описание продукта шестеренного насоса Читать далее »

Меры предосторожности при установке насоса

The quality of the installation and commissioning of the pump directly affects the normal operation of the pump, as well as the service life and performance parameters of the pump. 1. Prepare (а) The surface of the foundation shall be level and firm, and the surrounding surface of the anchor bolts shall be level and

Меры предосторожности при установке насоса Читать далее »

Прокрутить наверх